Pool Tile Care

Pool Tile Care

Southwest Tile Care uses a clean system which safely cleans and removes calcium from pool tile and fountains with no sand or glass beads. It is safe on pool tiles and the environment with no abrasive acids. The system utilizes a standard pressure washer with an environmentally-friendly soft abrasive media that gently removes calcium, mold, mildew and hard water deposits from pool tile, walls and decks of pools. The abrasive is aggressive enough to remove the toughest deposits, but gentle enough to not damage the pool grout or scratch the pool tile glaze.

WHAT SOUTHWEST TILE CARE CAN DO:
  • Full Surface Preparation - Clean out old caulk, wire wheel the joints edges and ensure a dry, solid joint
  • Install new closed cell backer rod in the joints if needed
  • ​Caulk is applied by gun or hand tooled
  • We use a professional grade polyurethane or silicone sealants
  • Finish the top edge with a light sand finish
  • Clean-up and disposal of all old caulk
POOL TILE AND POOL GROUT REPAIR

Southwest Tile Care will visually inspect your pool and spa for loose and missing pool tiles. We will clean the pool tile and pool grout surface and reattach the missing pool tiles. We will also color match the pool grout as close as possible and replace the pool grout where needed.

PRESSURE WASHING
Upon Request, Southwest Tile Care will pressure wash your pool deck for free with every complete pool tile cleaning. We also clean walkways, driveways, masonry walls.
Share by: